HP 1040 User Manual
Page 70
Care and maintenance 64
LCD error messages
Junk Fax Empty
You attempted to delete a junk fax number when there is no
junk fax number.
Junk Fax Full
The machine can hold only 20 junk fax numbers.
Load Document
You must load a document before preceding.
Memory Full
Memory has become full while receiving a fax. It will not
answer the telephone until memory has been cleared. Print any
faxes stored in memory and, if necessary, clear scheduled jobs
See
Memory Full
Press Start/Enter
to continue
Memory has become full while scanning a document. Press
Start/Enter to send or copy the scanned pages only. To cancel
the job press Cancel and try again when memory becomes
available, or split the new document into smaller parts. See
Memory Received
Ink Low. Install
new ink cartridge
The machine has data stored in memory. Replace the print
cartridge with new one in order to print the faxes.
Memory Received
Load paper and
press Start/Enter
Load paper and press Start/Enter. There might be a jam. Clear
the jam as described in
Memory Received
Install ink
cartridge
There is no print cartridge in the machine. Install a print
cartridge.
New Fax Received
The machine is low on ink and has received faxes into memory.
You must replace the print cartridge (see
on page 56.) and reprint the faxes from memory (see
No answer from
remote fax
The other machine has not answered after all redial attempts to
send a fax.
No CID Number
The machine could not detect the CID (Caller ID) number.
No Dial Number
There is no number in the redial memory.
Not Found
The number you are searching for does not exist in memory.
Number already
registered
The number you are trying to enter already exists in the phone
book or junk fax list.
Number Not Assigned
There is no number assigned to this One-Touch or two-digit
Speed number.
Display
Status/Solution