Harbor Freight Tools 95014 User Manual

Page 5

Advertising
background image

outlined in the manufacturer’s manual for the object you intend to

sandblast.

28.

Avoid unintentional starting. Make sure the Control Lever (42C) on the Blast

Gun is in its

“OFF” or “cLOSED” position when the tool is not being used.

29.

WARnIng! Some dust created by power sanding, sawing, grinding, drilling,

and other construction activities contain chemicals known (to the State of

California) to cause cancer, birth defects, or other reproductive harm.

Some examples of these chemicals are:

* Lead from lead-based paints,

* Crystalline silica from bricks, cement, and other masonry products,

* Arsenic and chromium from chemically treated lumber.

(California Health & Safety Code 25249.5, et seq.)

30.

WARnIng! Abrasive blasting with media containing crystalline silica

can cause serious or fatal respiratory disease. Exposure to crystalline silica

may cause silicosis (a serious lung disease), cancer, and death. Exposure to

aluminum oxide (a dust generated from material removing processes) can result

in eye, skin, and breathing irritation. Always use an ANSI approved respirator,

safety impact eye glasses, and a full face shield. Avoid skin exposure. Proper

ventilation in the work area is required. Read and understand the

ten

recommended measures below to reduce crystalline silica exposure in the

workplace and prevent silicosis and silicosis related injuries and deaths.

The following ten measures are recommended to reduce crystalline silica

exposures in the workplace and prevent silicosis and silicosis related

injuries and deaths:

1.

Prohibit silica sand (or other substances containing more than 1%

crystalline silica) as an abrasive blasting material and substitute less

hazardous materials.

2.

Conduct air monitoring to measure worker exposures.

3.

Use containment methods such as blast-cleaning machines and cabinets

to control the hazard and protect adjacent workers from exposure.

4.

Practice good personal hygiene to avoid unecessary exposure to silica

dust.

5.

Wear washable or disposable protective clothes at the worksite. Shower,

and change into clean clothes before leaving the worksite to prevent

contamination of cars, homes, and other work areas.

SKU 95014

For technical questions, please call 1-800-444-3353 PAGE 5

Advertising