HP h4000 Series - Manual (Page 36)

Managing the Battery
User’s Guide 3–11
Charging with the Desktop Cradle and
AC Adapter
Use the Desktop Cradle to:
■ Charge the iPAQ Pocket PC.
■ Synchronize the Pocket PC with your computer.
(For information on synchronizing, refer to Chapter 2,
“Using ActiveSync.” )
To charge the iPAQ Pocket PC using the desktop cradle:
1. Plug the AC Adapter into an electrical outlet 1 and connect
the other end of the AC Adapter to the AC connector on the
desktop cradle 2.
2. Slide the bottom of your iPAQ Pocket PC into the cradle 3
and push firmly to seat it.
Ä CAUTION: To avoid damaging your iPAQ Pocket PC or the cradle,
check to be sure the iPAQ Pocket PC and cradle connectors are properly
aligned before pushing the Pocket PC into the cradle.
Note: The amber charge light on the iPAQ Pocket PC blinks while
the battery is recharging and turns solid (nonblinking) when the
battery is fully charged.
343434-001.book Page 11 Tuesday, September 9, 2003 12:56 PM