Humax IRHD-5000C - Manual (Page 48)

9. Installation
GB47
User’s Manual
9.2 Software Update
Software Update allows you to update the system software.
1. Press the MENU button.
2. Select Installation using the / button and press the OK button.
3. Select
Software Update using the / button and press the OK button.
4. When new software is detected, you can choose to download the software immediately or save for
later.
Note:
•
For more information about the software update, refer to 11. Software Update.
• Software Update is activated when a new software is found.
9.3 Default Setting
Default Setting enables you to restore the product to the factory default.
Warning: Please note that once you perform Default
Setting, all data such as channel list and all
user confi gured data will be deleted.
1. Press the MENU button.
2. Select Installation using the / button and
press the OK button.
3. Select Default Setting using the / button and
press the OK button.
4. Select Yes and press the OK button to restore all
setting to factory default. To return to the previous
menu, select No and press the OK button.
5. You will be prompted to enter your password
again before starting to load default setting. Enter
the password to proceed.
6. When default setting is completed, installation wizard pops up automatically and assists channel
search.
Tip: The default password is 0000.
Note: For detailed information about the installation wizard, refer to Chapter 3. Installation Wizard.