HONDA GX35 User Manual
Page 7
ENGLISH
MAINTENANCE SCHEDULE
SAFETY PRECAUTIONS
Carbon monoxide poisoning from engine exhaust.
Burns from hot parts.
Injury from moving parts.
7
Make sure the engine is off before you begin any maintenance
or repairs. This will eliminate several potential hazards:
Be sure there is adequate ventilation whenever you operate
the engine.
Let the engine and exhaust system cool before touching.
Do not run the engine unless instructed to do so.
Read the instructions before you begin, and make sure you have
the tools and skills required.
To reduce the possibility of fire or explosion, be careful when
working around gasoline. Use only a non-flammable solvent,
not gasoline, to clean parts. Keep cigarettes, sparks and flames
away from all fuel related parts.
Remember that an authorized Honda servicing dealer knows your
engine best and is fully equipped to maintain and repair it.
To ensure the best quality and reliability, use only new genuine
Honda parts or their equivalents for repair and replacement.
These items should be serviced by your Honda servicing
dealer, unless you have the proper tools and are mechanically
proficient. Refer to the Honda shop manual for service
procedures.
Service more frequently when used in dusty areas.
For commercial use, log hours of operation to determine
proper maintenance intervals.
Check that there is no crack and abnormal wear-out in the belt,
and replace if it is abnormal.
Failure to follow this maintenance schedule could result in non-
warrantable failures.
(1)
(2)
(3)
(4)
REGULAR SERVICE PERIOD (3)
Check-adjust
Check-adjust
Check-adjust
Perform at every
indicated month or
operating hour interval,
whichever comes first.
ITEM
First
month
or
10 hrs
Every 2
years
or
300 hrs
Every 3
months
or
25 hrs
(1)
Engine oil
Air cleaner
Spark plug
Timing belt
Spark arrester
(Applicable
types)
Exhaust Filter
(Applicable
types)
Engine cooling
fins
Nuts, bolts,
fasteners
Clutch shoes
Idle speed
Valve
clearance
Combustion
chamber
Fuel filter
Fuel tank
Fuel tubes
Oil tube
Check level
Change
Check
Clean
Replace
Check
Clean
Clean
Check
Check
Check
Clean
Check
Clean
Check
Check
After every 300 hrs. (2)
Every 2 years (Replace if necessary) (2)
Every 2 years (Replace if necessary) (2)
Refer
to
Page
9
10
11
Shop
manual
12
14
13
11
4
Shop
manual
Shop
manual
Shop
manual
Shop
manual
12
12
Shop
manual
Shop
manual
Each
use
Every
year
or
100 hrs
(2)
(2)
Every 6
months
or
50 hrs
(2)
(Retighten if necessary)
After every 300 hrs (2) (4)
06/11/06 12:22:11 32Z6J600_007