Hamilton Beach Big Mouth 840170100 - Manual (Page 11)

11
Cleaning, Storage and Maintenance
1. Wash bowl, lids, blade, discs,
removable drive sleeve and food
pusher in hot, soapy water. Rinse
and dry thoroughly. See page 5 for
information on how to remove food
chute lid for cleaning.
To clean food thoroughly from the
bowl and bowl lid/food chute,
immerse in hot, soapy water.
NOTE: Do not store unit with lid in
locked position; this may put strain
on interlock tab.
2. Wipe base, control panel, and cord
with a damp cloth or sponge.
To remove stubborn soil, use a mild
non-abrasive cleanser.
3. To store, place bowl on base.
Then place Chopping/Mixing Blade
on motor shaft and Slicer/Shredder
Disc on Chopping/Mixing Blade.
The Removable Drive Sleeve may be
stored in the bowl. Place lid on bowl
but do not lock.
4. Monthly place a drop of vegetable oil
on each screw in the food chute.
The suction cup feet on the bottom of
your Big Mouth
™ Food Processor are
designed to keep the unit stationary
during use. To maximize the life of your
Big Mouth
™ please review the following
directions:
OR
With Big Mouth ™ fully assembled: lift it
from counter by
placing hands
under unit as
shown and lifting
to one side.
With Big Mouth ™ fully assembled: lift it
from counter by
grabbing the han-
dle as shown and
lifting from same
side as handle.
With bowl and lid removed from Big
Mouth ™ : lift it
from counter by
placing hands
under unit as
shown and lifting
to one side
OR
How to Release Suction Cup Feet
After Use
840170100 Ev03.qxd 7/16/07 10:37 AM Page 11