Hotpoint HDA3530 - Manual (Page 9)

Energy Options
HI TEMP Provides extra heat for best performance. It is used best with
WASH ON/ heavily-soiled dishes.
HI TEMP WASH
HI TEMP Turns HI TEMP WASH off.
WASH OFF
HEATED DRY/ Turns the heating element on for fast drying. This option will extend
HEATED DRY ON the time of your wash cycle.
HEATED DRY OFF Turns HEATED DRY off. Dishes air dry naturally and energy
is saved.
ENERGY SAVER Turns all options off.
Customer Service
Troubleshooting T
ips
Operating Instructions
Safety Information
Control Settings
Cycles
POTS & PANS/ For heavily soiled dishes or cookware with dried-on or baked-on soils.
HEAVY WASH Everyday dishes may be included. This cycle will not remove
burned-on foods.
NORMAL WASH For loads of everyday dishes, glasses and cookware with medium
soils. NOTE: Many dishes have lighter soil than normal. Choosing
a cycle other than NORMAL WASH will save energy and water.
SHORT WASH For quickly washing loads of everyday dishes with medium soils
that have not dried on, such as loads consisting mostly of glasses.
LIGHT WASH/ For dishes with light soils.
WATER SAVER
RINSE & HOLD For rinsing partial loads that will be washed later.
Do not use detergent.
PLATE WARMER For warming clean dishes and serving plates. This cycle will take
approximately 32 minutes.
Start
Slowly turn the Dial to the START or ON position, or the selected cycle.
Don’t turn it past the START, ON or cycle position, or you could
accidentally miss a rinse. For models HDA2120 and HDA2130, when
using the POTS & PANS cycle, slowly turn the Dial to the NORMAL/POTS
& PANS
position and press the POTS & PANS ON button. When using
the NORMAL cycle, slowly turn the Dial to the NORMAL/POTS & PANS
position and press the POTS & PANS OFF button. See About the Dial
Cycles
section for other cycles on these models.
There is a time delay between start-up and water fill so you will not
hear any wash action right away.
■ Latch the door to begin the cycle.
9