Parts location, Warning labels on the machine, For safe operation – Husqvarna BP4E User Manual

Page 3: Specifications 3. warning labels on the machine, Parts location 2. for safe operation

Advertising
background image

U
S

1. Read this Sprayer Owner/Operator

Manual carefully. Be sure you

understand how to operate this unit

properly before you use it. Failure to

do so could result in serious injury.

2. Be sure to keep this manual handy

so that you may refer to it later

whenever any questions arise. Also

note that you are requested to

contact the dealer from whom you

purchased the product for

assistance in the event that you

have any questions which cannot be

answered herein.

3. Always be sure to include this

manual when selling, lending, or

otherwise transferring the

ownership of this product.

4. Do not lend or rent your machine

without the owner’s manual.

5. Be sure that anyone using your unit

understands the information

contained in this manual.

6. Never let a child under 13 years old

use the machine.

7. DO NOT use flammables in the

sprayer. They can ignite or explode

causing serious injury.

8. Always wear splash goggles and

protective gear and clothing when

filling, using and/or cleaning the

sprayer.

9. Oil the rubber cap gasket prior to

first usage so the gasket will seal

properly.

10.Tighten all connections before using

the sprayer. Some may not he

properly secured and must be

tightened to prevent leakage.

2. Specifications

3. Warning labels on the machine

Type ................................................................... Back Pack

Model Name....................................................... BP4E

Dimensions (LxWxH).......................... 530x360x210 (20.9x14.2x8.3) mm (in)

Dry Weight........................................................................... 5.2 (10.4) kg (lbs)

Tank capacity................................................................... 15.1 (4.0) litter (Gal)

Max. Pressure............................................................10.5 (150) kgf/cm (psi)

Working Pressure.......................................... 1.05 - 5.6 (15 - 80)kgf/cm (psi)

Sealed/O rings............................................................................. VITON/Nytril

Pump

Type.....................................................Piston/Diaphragm/Agitation

Reparability............................................................................. YES

Tank Mouth .................................................................................................. 6”

Wand Type ...................................................................................... 20” Brass

Standard Nozzle .................................................................Adjustable Nozzle

2

2

If warning label peel off or become soiled and impossible to read,

you should contact the dealer from which you purchased the

product to order new labels and affix them in the required

location(s).

Never modify your machine.

We will not warrant the machine, if you use the remodeled

machine or you don’t observe the proper usage written in the

manual.

“The distinctive tank shape is a registered trademark of SP

Systems’ affiliate, US Sprayer Holding Co., LLC, and licensed

exclusively to SP Systems for use with SP Systems’ registered

“large mouth” trademarks.”

1. Tank

2. Pump

3. Lid (cap)

4. Shoulder Strap

5. Hose

6. Wand

7. Nozzle,

Spray Tip Set

1. Parts location

2. For safe operation

BP4E

US-3

BEFORE USING:

Oil cap gasket, oil check valve, and

keep breather hole clear of debris.

Your failure to oil and to clean check

valve, and to keep breather hole

opening to allow air into tank, can cause

tank to collapse and crack due to

vacuum created by the pump.

1

7

6

3

2

4

5

Advertising