HoMedics TI-150 - Manual (Page 8)

14 13
How to take a temperature
reading of a person:
1) Turn unit on by sliding cover
into “on” position.
2) Select PERSON mode (if not
already in PERSON mode), by
pressing MODE button.
3) Press and hold “SCAN” button.
4) Move thermometer into
position, pointing at the
center of the forehead.
• Light around “SCAN” button
will flash until unit is in
proper position from
person’s forehead.
5) Release “SCAN” button. Do not move thermometer
until the temperature appears on display.
6) Turn thermometer off by sliding cover into “off” position
or thermometer will enter sleep mode after 1 minute. To
“wake” thermometer press SCAN button.
Note: Wait 5 seconds between readings.
Fever Alarm
The Fever Alarm is a unique feature that alerts the user
anytime a temperature reading is 100°F (37.8°C) or greater
with a visual notice on the display and a triple beep audio
alert (visual alert only in memory mode or night mode). For
readings at or above this temperature it is LIKELY a fever is
present.
Note: A temperature reading below 100°F (37.8°C) does
not mean that a fever is not present. Likewise, a
temperature greater than or equal to 100°F (37.8°C) does
not guarantee the presence of a fever.
This product is not intended for substitution of consultation
with a physician. Contact your physician if any one of the
following conditions is present: Vomiting, diarrhea, change
in breathing activity or appetite, irritability, lethargy, or
unusual sleepiness.
• Light will be on and not
flashing when
positioned properly.
Figure 6
Figure 7
Figure 5
on off