Humax TV HDCl-2000 - Manual (Page 70)

10.3 Software Update
Software Update allows you to update the system software.
1. Press the MENU button.
2. Select Installation using the button and press the OK
button.
3. Select Software Update using the button and press the
OK button.
1. Automatic Update
1. Select Automatic Update and press the OK button.
2. When new software is detected, you can choose to download the
software immediately or save for later. You can refuse software
update if not needed.
3. When there is no new software to update, a pop-up will appear.
2. Manual Update
1. Select Manual Update and press the OK button.
2. Enter the values for Satellite, Frequency, Polarisation, Symbol
Rate and FEC.
3. Select Search and press the OK button.
4. When new software is detected, you can choose to download the
software immediately or save for later. You can refuse software
update if not needed.
5. When there is no new software to update, a pop-up will appear.
GB 69