HONDA EM5000is - Manual (Page 75)

73
TECHNICAL & CONSUMER INFORMATION
Problems That May Affect Emissions
Replacement Parts
Maintenance
If you are aware of any of the following symptoms, have your engine
inspected and repaired by your authorized Honda servicing dealer.
Hard starting or stalling after starting.
Rough idle.
Misfiring or backfiring under load.
Afterburning (backfiring).
Black exhaust smoke or high fuel consumption.
The emission control systems on your Honda engine were designed,
built, and certified to conform with EPA and California (models
certified for sale in California) emission regulations. We recommend
the use of Honda Genuine parts whenever you have maintenance
done. These original-design replacement parts are manufactured to
the same standards as the original parts, so you can be confident of
their performance. The use of replacement parts that are not of the
original design and quality may impair the effectiveness of your
emission control system.
A manufacturer of an aftermarket part assumes the responsibility that
the part will not adversely affect emission performance. The
manufacturer or rebuilder of the part must certify that use of the part
will not result in a failure of the engine to comply with emission
regulations.
Follow the MAINTENANCE SCHEDULE on page . Remember that
this schedule is based on the assumption that your machine will be
used for its designed purpose. Sustained high-load or high-
temperature operation, or use in dusty conditions, will require more
frequent service.
43
07/12/21 14:07:53 31Z11710_074