HONDA EM5000is - Manual (Page 38)

36
OPERATION
AC Receptacle Selection
Power Producing Circuits
RECEPTACLE 1
TERMINAL 4A
RECEPTACLE 2
RECEPTACLE 4
TERMINAL 4B
RECEPTACLE 3
VOLTAGE
SELECTOR
SWITCH
120 V/240 V 120 V ONLY
POWER
CIRCUIT 1
POWER CIRCUIT 1
POWER
CIRCUIT 2
POWER CIRCUIT 2
The control panel, shown below, has a voltage selector switch and
four receptacles. Receptacle
4, the 240-volt receptacle, has two
powered terminals, 4A and 4B.
This generator is equipped with two power generating circuits. When
the voltage selector switch is in the 120V/240V position, each of the
two power producing circuits supplies power to specific receptacles.
When the voltage selector switch is in the 120V ONLY position, the
power producing circuits operate in parallel, sharing the total load
connected to terminal 4A and receptacles 1, 2, and 3.
07/12/21 14:03:19 31Z11710_037