Honeywell CHRONOTHERM IV T8665A - Manual (Page 25)

25 69-1536–3
SETTING THE CLOCK
Setting Current Day and Time
On initial power up or after an extended power loss, “1:00 PM”
flashes on the display until a key is pressed.
1. Press Set Current Day/Time key.
Press Set Current Day/Time key to
show information displayed.
Set Current
Day/Time
M14580
Set Day/Time
Mon
PM
IMPORTANT
Always press the keys with your fingertip or similar blunt tool. Sharp instruments like pens and pencil
points can damage the keyboard.