Panasonic GD76 - Manual (Page 49)

Call Duration
1 From IdleZ Q, select Phone Menu > Call Service >
Calls Z Q
Note: The Calls function is SIM dependent (Q). If the SIM does not
support this function then items under Calls menu will be found directly
under Call Service menu.
2 Use e to select one of the functions described below, and Z
Q
The Last Call function will display the duration and call charge if available, of
the last call. Times are indicated as: hours (0-99), minutes (0-59), seconds
(0-59) - HH:MM:SS.
The All Calls function displays the accumulated duration and call charge, if
available, of Incoming and Outgoing calls. The lock code or PIN2 is required
to reset the timer and call charge.
GPRS Call Duration
1 From Idle Z Q, select Phone Menu > Call Service >
Connections Z Q
Note: The Connections function is SIM dependent (Q).
2 Use e to select one of the functions described below, and Z
Q
The Last Connection function will display the duration and amount of data
transfer of the last call. Times are indicated as: hours (0-99), minutes (0-59),
seconds (0-59) - HH:MM:SS.
The All Connections function displays the accumulated duration and
amount of data transfer. The lock code or PIN2 is required to reset the
timer.
The Call Priority function is used to determine whether or not an incoming
voice call should interrupt a data call.
39
Call Information