Panasonic EB-GD67 - Manual (Page 60)

Call Charges
To maintain control over the cost of calls that are made, the phone can be
set to restrict use to a finite number of units overall. (Q)
Setting the Unit Price
Firstly, a price per unit must be entered. This is the cost that the Service
Provider charges for one unit of call time. (Q)
1 From Idle F Q, select Phone Option > Call Service >
Service Charges > Price/Unit F Q
2 F Q to edit the values
At this point you will be asked to enter your PIN2 or Lock code F Q.
3 Enter a currency unit (up to three characters) e.g. GBP F Q
twice
4 Enter a price F Q twice
Setting the Maximum Unit Level
This function allows the user to pre - determine the maximum cost of calls
made. (M)
1 From Idle F Q, select Phone Option > Call Service >
Service Charges > Max Cost F Q
2 F Q twice to edit the values
At this point you will be asked to enter your PIN2 or lock code F Q.
3 Enter a value (number of units) which is to be the maximum
permitted, and the corresponding cost will be displayed
4 F Q twice to accept
Note: The duration of one unit may vary during the day, peak and off-peak
times. Therefore, the call charge can be calculated accordingly. However,
call charge information may not give an accurate reflection of the tariffs
charged by your Service Provider.
46
Call Information