Hamilton Beach 840067300 - Manual (Page 6)

6
Processing Using S-Blade
The S-Blade can be used to coarsely
chop, finely mince, mix, or puree food
to a smooth consistency.
1. Make sure the Control Switch is turned
to OFF ( O ) and the unit is unplugged.
2. Lock the bowl onto base. (See “How
to Lock the Bowl” on page 5.)
3. Place the S-blade onto motor shaft
of food processor in center of bowl.
Turn slowly until blade drops into
place. Handle carefully; the blade
is sharp.
4. Lock cover onto bowl. (See “How to
Lock the Cover” on page 5.) Insert
food pusher into food chute.
5. Plug in unit and process food. The
processing speed and time will deter-
mine the finished consistency of the
food. The Pulse
button can help
you avoid overprocessing.
Processing Using Slicer/Shredder
• To slice or shred cheese, select firm
cheese like cheddar, monterey jack,
or swiss. Place cheese in freezer for
one hour before processing.
• The Reversible Slicer/Shredder Disc
has a slicing blade on one side and
shredding teeth on the other. Place
on disc shaft with desired cutting
edge facing up.
• To julienne vegetables, slice then
remove from bowl and restack the
vegetables. Pack into food chute with
slices vertical. Slice again to make
match-stick cut vegetables.
1. Make sure the Control Switch is turned
to OFF ( O ) and the unit is unplugged.
2. Lock the bowl onto base. (See “How
to Lock the Bowl” on page 5.)
3. Place disc shaft on the motor shaft.
4. Put Slicer/Shredder Disc on disc
shaft with the desired side facing up
for either slicing or shredding. Lock
cover onto bowl. (See “How to Lock
the Cover” on page 5.)
Slicer/Shredder
Disc
Disc Shaft
S-Blade
Motor Shaft