Oiling the air filter, Bevel gear, Maintenance – Husqvarna 324RX User Manual

Page 29

Advertising
background image

MAINTENANCE

English

29

Oiling the air filter

Always use HUSQVARNA filter oil, art. no. 531 00 92-48.
The filter oil contains a solvent to make it spread evenly
through the filter. You should therefore avoid skin contact.

Put the filter in a plastic bag and pour the filter oil over it.
Knead the plastic bag to distribute the oil. Squeeze the
excess oil out of the filter inside the plastic bag and pour off
the excess before fitting the filter to the machine. Never use
common engine oil. This would drain through the filter quite
quickly and collect in the bottom.

Bevel gear

The bevel gear is filled with the right quantity of grease at the
factory. However, before using the machine you should
check that the bevel gear is filled three-quarters full with
grease. Use HUSQVARNA special grease.

The grease in the bevel gear does not normally need to be
changed except if repairs are carried out.

IMPORTANT! Use only HUSQVARNA replacement parts.
Use of other brands of replacement parts can cause
damage to your unit or injury to the operator or others. Your
warranty does not cover damage or liability caused by the
use of accessories and/or attachments not specifically
recommended by HUSQVARNA.

Advertising