Harbor Freight Tools 38137 - Manual (Page 3)

Page 3 For technical questions, please call 1-800-444-3353. Item 38137
3. Attaching Handle
Attach the Handle (E) to the Turning Bracket
by using Bolt (M6x63) (H), Spring Washer
(M), Flat Washer (N) and Nut (K).
Turning
Bracket (D)
Handle (E)
Spring
Washer (M)
Flat Washer (N)
Nut (K)
Bolt (M6x63) (H)
4. Attaching Wheels
Install the four Wheels (F) by placing each wheel
on the axle portion of the Turning Bracket and
the Rear Bracket. Secure each Wheel with a Flat
Washer (M16) (Q) and a Split Pin (M3x30) (R).
Axle
Flat Washer (M16) (Q) Split Pin (M3x30) (R)
Wheels (F)
5. Test all bolts and nuts for tightness before turning the
wagon over on its wheels.
Roll the wagon to check for proper wheel operation.
Periodically check tire inflation (maximum tire inflation
is 30 PSI). Periodically lubricate wheel axles.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A
REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY
KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT
ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY
THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT
OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.