HONDA QH4000 - Manual (Page 9)

Tighten the bolts item
Refer to the Torque Specification Table
on page
Secure the rear hitch plate
item
to the tractor by tightening the
then the 1 bolt (fig. 1 , item
to the Torque Specification
Table on page 11.
If necessary, adjust the lift arm
item so that the handle section is
parallel to the fender with approximately
1" of clearance when it is pulled 1
the way back.
Tighten the x 4" bolt item
on the lift lever to 100
bolt item and
OM 0149 7