Honeywell Dolphin Demos - Manual (Page 32)

5 - 6 Rev A
8/6/08
Dolphin® Demos User’s Guide
Default Settings
To restore the Scan Demo to default settings at any time, tap File > Restore Defaults.
Taking Images of Bar Codes
The Scan Demo takes an image of each bar code it scans. To save that image, tap File > Save Last
Image immediately after you scan a bar code. An image of the bar code is saved to the \IPSM folder.
Recording Custom Settings
You can save a configuration log file to the root file directory by tapping File > Write Config Log.