Hamilton Beach 2254 - Manual (Page 3)

3
Parts and Features
1. Filler Cap
2. Lid*
3. Jar
4. Gasket
5. Cutting Blades
6. Safety Base
7. Control Panel
8. Base
The Hamilton Beach/Proctor-Silex, Inc.
Type FP04 food processor attachment is
intended for use with models without a
locking base. The Type FP04 food proces-
sor attachment may draw less power than
the marked rating.
The wattage rating of the blender is
based on available cutting blades and jar
combinations that may not be provided
with your unit, but are available as replace-
ment parts. The blender as provided may
draw significantly less power.
If the cutting blades lock and do not move,
it will damage the motor. Do not use. Call
the toll-free customer service number for
information.
Do not place blender jar in the freezer
filled with food or liquid. This will freeze
and damage the cutting blades.
Before First Use: After
unpacking the blender, wash
everything except the blender
base in hot, soapy water. Dry
thoroughly. Wipe the blender
base with a damp cloth or
sponge. DO NOT IMMERSE
THE BASE IN WATER. Care
should be taken when handling
the cutting blades as they are
very sharp.
*Some blender lids come with
a lid and lid
seal.
840124700 ENv03.qxd 3/3/04 10:28 AM Page 3