haier WQP4-1A - Manual (Page 12)

MAINTENANCE
Daily Maintenance
1. Take out the filter after draining is finished, and the washing box
is cooled.
2. Remove residues on the filter. Then, wash and clean it.
3.Mount the filter back after the water on it is dried.
Weekly Maintenance
Warning
Do not flush the dishwasher directly with
water. Otherwise, it will cause shot circuit,
electric shock, rust and faults.
Forbidden
Do not touch plug and electric parts or
operate the power switch with wet hands
to avoid electric shock.
Forbidden
Warning
Check the power plug and the socket for dust
periodically.The plug shall be inserted com-
pletely into the socket. If there is dust on it,
connection is not completely. That may cause
electric shock or fire.
Caution
Caution
Cleaning should be done only after draining
and cooling of the washing box. Otherwise,
you may get burn-ed.
Caution
If the unit will not be used in a week or more,
take off the power plug for safety.
Dust adhering to the plug or the socket may
cause overheat or fire.
take off
the plug
take off
the plug
When cleaning or conducting maintenance,
switch off the power switch and take off the
plug. Otherwise, if water enters the unit
accidentally, it may cause electric shock or
burn.
1.Clean the sprayer
1)Remove the card and seal.
Method of removing the sprayer:
2) After the sprayer is taken off, wash out the adhered matters
completely.
3)Reassemble it after washing
Do not forget to install the seal (white) on the sprayer. If you
forget it, the sprayer can not rotate smoothly, that will reduce its
capacity.
4) After installation, rotate the sprayer with a hand gently. Make
sure the installation is correct.
Installation method of the sprayer:
Card
Sprayer
Wearing ring (black)
GB KNNK