Hyundai H-CMD4007 - Manual (Page 18)

18
Loading a disc
1. Turn the power on.
2. Press REL button on the panel to open the front panel.
3. Insert the disc with the printed side facing upward into the slot.
4. Close the front panel.
5. Press MODE button to select the DVD mode. The monitor will show the disc content. The DVD disc will
play automatically. When the MP3 disc is loaded, press PLAY to start the playback.
6. To eject the disc, first press REL button to open the front panel.
7. Press EJECT button on the base to eject the disc.
8. Close the front panel.
Note: If a disc is left in the ejected position for several seconds, the disc is automatically reloaded. If you force
a disc into before auto reloading, this can damage disc.
Inserting the SD/MMC card and USB device
Insert an SD/MMC card or USB device into SD/MMC compartment or USB socket respectively. Then the
playing mode will be changed into SD/MMC or USB mode automatically. The first card/USB device track
playback will start.
When SD/MMC card and USB device are both inserted into their compartment or socket, the playing mode will
be changed into the mode of the later one. You can select the source using MODE button on the RC or on the
panel.
Once the SD card could not eject automatically after pressing, just take it out manually.
Note: This unit supports USB drivers and memory cards with up to 1 Gb.
Playing/pausing
To ensure good system performance, wait until the unit finishes reading the disc information before proceeding.