Harman-Kardon GPS-500 WE - Manual (Page 18)

To use the MTP mode, you must have a PC that is running the Windows® XP
operating system (Service Pack 2 or higher) and has Windows Media Player
10 or higher installed.
T
O
T
RANSFER
F
ILES TO THE
GPS-500
IN
MTP M
ODE
:
1. Insert an SD card into the GPS-500’s SD card slot (see page 4).
2. Make sure the USB cable is disconnected from the GPS-500.
3. Set the GPS-500’s USB mode to MTP (see page 17).
4. Connect the GPS-500 to
your computer’s USB hub
(right).
5. Launch Windows Media
Player.
6. Locate the files you want to
transfer.
7. Select Windows Media
Player’s S
YNC
mode (see
below).
8. Drag the files you want to transfer into the Windows Media Player S
YNC
L
IST
(see below).
9. Select S
TART
S
YNC
and wait for the process to finish (see below).
NOTE: Your Windows Media Player screen may look different from the example.
Once the Sync is finished, you can unplug the GPS-500 from your computer
and watch or listen to the files on it. (See Listening to Music, on page 20, and
Watching Videos, on page 21).
7. Select S
YNC
Mode
8. Drag Title to Sync List
9. Select S
TART
S
YNC
U
ser Manual
18
e d i u g + y a l p
™
GPS-500