Hasselblad 949 - Manual (Page 9)


Select Maintenance > Feeder from the FlexColor menu bar. The
Feeder window opens.
Click on the Mount button.
The Mount feeder window opens, which guides you through each
step of preparing the scanner for the Feeder. The procedure here in
this manual also describes each step.
Click on the Continue button.
The scanner then positions itself to accept the Feeder and shuts itself
down. The Mount feeder window updates with new instructions.
Get the Slide Feeder and study its back panel. Locate the connector
( A ) and two mounting pins ( B ) as shown in Figure 3 below.
5.
6.
7.
8.