Honeywell T8132C User Manual
Page 14
Advertising
14
69-0786—2
To remove batteries, press down on the left
ends of the batteries. If you insert new batter-
ies within 20 to 30 seconds of removing the old
ones, the thermostat does not require repro-
gramming. However, if the display is blank, the
batteries are dead or incorrectly installed and
the thermostat requires reprogramming.
•
Install the fresh batteries, as shown, making
sure positive and negative terminals are
oriented correctly.
•
Replace the battery door.
INSTALL TWO AA ALKALINE
BATTERIES AS SHOWN
M1713
Advertising