HP mp3130 - Manual (Page 42)

42 User’s Guide
Adjusting the Projector
Adjust picture menu
Adjust picture
Picture mode Adjusts the color settings for the type of picture. You
can optimize the picture for computer presentations
or video output. The remote control and projector
have buttons to change the picture mode.
Brightness Brightens or darkens the image.
Contrast Sets the difference between light and dark areas.
Color space For certain component inputs, selects the type of
signal encoding used by the input source. You can
override the selection made by the projector.
Advanced picture > Adjusts the advanced picture settings.
Color saturation Adjusts the intensity of colors.
Tint Shifts colors toward red or green.
Sharpness Sharpens or softens the image.
Color temperature Shifts colors toward red or blue.
Frequency Adjusts the timing of the projector relative to a
computer graphics card.
Tracking Synchronizes the projector to a computer graphics
card.
Vertical position Shifts the image up or down within the projection
area.
Horizontal position Shifts the image left or right within the projection
area.
Keystone correction Corrects the slanted edges of an image. This function
compensates for an image that is not automatically
corrected by the projector.