HP CM6049F MFP - Manual (Page 129)

Type and Size
Printing by Type or Size means that you want the product to pull from the tray that is loaded with the
correct type and size of media. Selecting media by type rather than source is similar to locking out trays
and helps protect special media from accidental use. For example, if a tray is configured for letterhead
and you select plain paper, the product will not pull the letterhead from that tray. Instead, it will pull from
a tray that has plain paper loaded and is configured for plain paper on the product control panel. Selecting
media by Type and Size results in significantly better print quality for heavy paper, glossy paper, and
transparencies. Using the wrong setting might result in unsatisfactory print quality. Always print by Type
for special print media, such as labels or transparencies. Print by Size for envelopes, if possible.
● To print by Type or Size, select the Type or Size from the Page Setup dialog box, the Print dialog
box, or the Print Properties dialog box, depending on the software program.
● If you often print on a certain type or size of media, configure a tray for that type or size. Then,
when you select that type or size as you print a job, the product automatically pulls media from the
tray that is configured for that type or size.
ENWW Configure trays 113