HP CM6049F MFP - Manual (Page 131)

Three operation modes Mailbox Mode assigns each bin to a user or group of users. Stacker Mode uses all three output
bins for all print jobs — when one bin is full, jobs are routed to the next bin. Function Separator
Mode sends copies to bin 1, faxes to bin 2, and print jobs to bin 3.
Stapler Built-in stapler staples jobs up to 50 sheets in size or 30 stapled jobs. Pages can be stapled
in one position at the front, in one position at the back, or at two positions at the side or top.
Large-capacity output bins The stacker has three bins: a 100-sheet bin, a 500-sheet bin, and a 1000-sheet bin.
Booklet maker finisher features
Table 7-9 Booklet-maker finisher features
Booklet-making The booklet-making feature staples and folds print jobs of 2 to 15 pages into a booklet.
Folding Single-sheet print jobs can be automatically folded in the center.
Job offset Each copy of a job is shifted to one side in the output bin in order to keep each copy separate
from the others. (Supported paper sizes: A3, A4, A4 rotated, A5, B4, B5, Ledger, Legal, Letter,
Letter rotated, Statement.)
Two operation modes Mailbox Mode assigns each bin to a user or group of users, and Stacker Mode uses both
output bins for all print jobs — when the top bin is full, jobs are routed to the next bin.
Stapler Built-in stapler staples jobs up to 50 sheets in size or 30 stapled jobs. Pages can be stapled
in one position at the front, in one position at the back, or at two positions at the side or top.
Large-capacity output bins The stacker has three bins: two 1000-sheet bins and one bin that can hold up to 25 saddle-
stitched booklets.
Accessory walkaround
Figure 7-1 3-bin stapler/stacker accessory
1
2 3
4
5
1 Output bins
2 Front door
3 Stapler unit
4 Top cover
5 Connection cable
Table 7-8 3-bin stapler/stacker features (continued)
ENWW Choose an output location 115