HONDA Hands Free Telephone System 08E00-ED0-1001-81 - Manual (Page 9)

– 6 –
1. Mobile phones (Handsets) are divided into 2 categories:
1-1 Hands-on mode: Without connecting hands-free car kit, the setting of the mobile phone will not effect
the hands free function.
1-2 Hands-free mode: While connecting hands-free car kit, the setting of the hands-free car kit will not
affect the mobile phone function.
2. While setting the hands-free function, the cellular phone must be first connected to hands-free car kit, then
it may activate and set up H/F FUNCTION from MENU on the screen of cellular phone.
(For instruction, please refer to cellular phone user manual.)
3. If the beep sound goes on and off from the audio speaker at a certain location, this means that they are
refreshing the registration between two base stations. This event is normal.
4. While using hands-free car kit, one should turn on car engine first, and then connect the phone cable with
one’s cellular phone so as to protect from damaging your battery.
5. After hands-free car kit is connected, one should take a notice on the cellular phone’s screen to see
whether switch to “:CAR” or “CHARGE” status. If not, it means hands-free car kit has not yet being
switched to hands-free status. Therefore, hands-free can not be used. Please refer to Q&A.
6. Please use original OEM battery. Non-Original OEM batteries may cause the system function improperly or
cause cellular phone to damage. If the cellular phone batteries are Li-oh or Li-mh, it is preferred for users
to discharge batteries and charge once a month. This can protect batteries’ life cycle from shortening
battery life.
d) Special Notice While Using Cellular Phone