haier 50FREE-3B - Manual (Page 8)

Install the water inlet hose
6 11
START
PAUSE
POWER
ON/OFF
Push the POWER ON/OFF button to switch on
the power. When the power is on, push it again
to switch off the power.
Push the POWER ON/OFF button to switch on
the power. If the START/PAUSE button is not
pushed, the washing machine will automatically
switch off the power after 5 minutes.
Power On/Off button
During operation of programs, it displays the remained time (minute).
In case of abnormal phenomenon, it displays the abnormal symbol (see to Page 16)
Wash remain time indicator digitron
The program is selected but not on,It displays the total minutes
of the program
Page 16
Start/Pause button
After the power is switched on, push it to
Start the machine
During working, push it to pause working.
During pause, push it to resume working.
Push the WASH buttonto set the wash
procedure.
During STANDARD GENTLE HEAVY
programs, push theWASH button to set
different wash time (STANDARD from0 to
25minutes GENTLE from 0 to 15
minutes;HEAVY from 30 to 50 minutes or 0
minutes )
During SAVE program, push the WASH
button, the machine have no reaction.
WASH button
PROGRAM SELECTION button
You can select from the following four programs.
Program
STANDARD
HEAVY
GENTLE
SAVE
Normal wash
Large, thick or heavily soiled laundry
Woollen textiles or underwear
10 min quick wash for load below 2 kg
2. Connect the other ends to the water inlet valve .
Water absorption cushion
Jointer of the water inlet hose
Jointer of the
water inlet valve
Figure 1
Figure 2
1. Attach the water inlet hoses to the water faucet. Using pliers, tighten
the coupling. ( As figure 1)
NOTE: Do not over tighten. Damage to the
valves can result.
( As figure 2)