HHB comm CDR-882 - Manual (Page 32)

Menu System
 CDR-882 User Manual Version 1.0 www.hhb.co.uk
Clock Submenu
The Clock submenu has only one option for adjustment.
Clock Source
By default, selection of word clock source is automatic, the
preferred source being dictated by the input source selected.
However, it is possible to “force” the selection of a particular
clock source.
Four options exist in the menu for Clock Source:
Option Clock Source
Auto Clock source is selected automatically depending on input
signal type. This is the default setting.
Internal Selects the internal clock; if a non-synchronous digital input
is used, it will be sample rate converted to the internal
clock frequency.
Word Clock Selects the external Word clock input (see page 11). Also
see note below.
Digital Input Uses the selected digital input as clock source; if an
analogue input is currently selected, the last-selected digital
input is used. Also see note below.
Note that it is not possible to select the Clock Source menu
option while the recorder is in RECORD mode.
Display Submenu
Two parameters of the LCD display itself are available for
adjustment in the Display submenu.
Contrast
A wide range of display contrast adjustment is provided (30
increments), to suit various ambient light levels and viewing
angles.
Invert
Under some extreme conditions a better display image may be
obtained with the video reversed (i.e blue on a white background
instead of white on blue). The Invert setting can be set to On to
achieve this.