HONDA H2000 - Manual (Page 14)

MOWING AND MULCHING RECOMMENDATIONS
4.
5.
6.
Install the bag support assembly on
the left and right struts, while inserting
the center strut pin
in the hitch plate
hole.
Grasp the upper chute by the chute
handle. Raise the upper and middle
chutes, then slide the middle chute
over the lower chute.
Install the grass bags, and secure the
hopper top with its retaining band.
Mulching kit reinstallation:
1. Remove the bagging kit in the reverse order of installation.
2. Install swirl guide A and the mulching blades if they have been removed.
Install swirl guide B and secure with the cover plate and the ring kit supplied with the
mulch kit the ring pin supplied with the bagging kit is too long.