HP Bluetooth Stereo Headphones - Manual (Page 6)

HP iPAQ Bluetooth Stereo Headphones User’s Guide 6
5. Tap the Manager button in the Bluetooth section of the
screen. For older iPAQ Pocket PC Models, tap the Bluetooth
icon at the bottom right of the screen, and open the Bluetooth
Manager. The following screen should appear:
6. On the headphones, press and hold the Multi Function button
in the center of the right earpiece for ten to fifteen seconds
until the light flashes red and blue.
7. The headphones are now in Pairing Mode. Release the button.
The light will continue to flash red and blue.
8. On the HP iPAQ Pocket PC, select New, then High Quality
Audio Setup from connection types.