Harrington Hoists NER2 - Manual (Page 9)

9
(N)ER2080S to (N)ER2100L (N)ER2100S to (N)ER2200L
Figure 3-3 Installation of Chain Container
3.2.5 When using an optional steel chain container, refer to the instructions and/or assembly drawing(s)
provided with the container for correct assembly and attachment.
3.2.6
WARNING
Verify that the load chain is not twisted or tangled prior to operating the hoist.
Make sure the bottom hook is not capsized. See Figure 3-4. Correct all chain irregularities before
conducting the first hoist operation.
3.2.7 Lubricate the entire length of the load chain with the supplied tube(s) of grease per the instructions in
Section 6.2.1 .
Figure 3-4 Capsized Hook and Chain
3.3 Mounting Location
3.3.1
WARNING
Prior to mounting the hoist ensure that the suspension and the supporting
structure are adequate to support the hoist and its loads. If necessary consult a professional that is
qualified to evaluate the adequacy of the suspension location and its supporting structure.
3.3.2
NOTICE
See Section 6.8 of the ER2OM for outdoor installation considerations.
3.4 Mounting the Hoist
3.4.1 Manual Trolley - Follow instructions in Owner’s Manual provided with the trolley.
3.4.2 Motorized Trolley - Follow instructions in Owner’s Manual provided with the trolley.
3.4.3 Hook Mounted to a Fixed Location - Attach the hoist’s top hook to the fixed suspension point.