Technical & consumer information 72, Engine design and performance maintenance tuneup – HONDA HRX217HXA User Manual
Page 74
TECHNICAL & CONSUMER INFORMATION
72
Engine Design and Performance
Maintenance
Tuneup
Engine Model
GCV190
Engine Type
4-stroke, overhead-cam, single-cylinder, forced air-cooled
Displacement
11.4 cu in (187 cc)
Bore and Stroke
2.71 x 1.97 in (69 x 50 mm)
Compression Ratio
8.5:1
Ignition System
Transistorized magneto
Maximum Horsepower*
6.5 bhp (4.8 kW) at 3,600 rpm
Maximum Torque
9.74 ft-lb (13.2 N•m) at 2,500 rpm
* Horsepower rating (shown as maximum power output at 3,600 rpm) is in accordance with
SAE J1995. Actual engine power will be lower. Engine power depends on accessories,
operating speeds, operating conditions, and other variables.
Fuel
Unleaded gasoline with a pump octane rating of 86 or
higher.
Engine Oil
SAE 10W-30, API SJ or later
Spark Plug Type
Regular:
NGK BP6ES
DENSO W20EP-U
Resistor: NGK BPR6ES
DENSO W20EPR-U
Maximum Governed
Speed
2,950 ~ 3,100 rpm
Shop
manual
Blade Control Cable
Adjust for 3/8 ~ 9/16 in (10 ~ 15 mm) free play at the
blade control lever.
Drive Clutch Cable
Adjust for proper operation.
Throttle Cable
Adjust for clearance on the control arm.
Blade Bolt Torque
36 ~ 43 ft-lb (49 ~ 59 N•m)
Spark Plug Gap
0.028 ~ 0.031 in (0.7 ~ 0.8 mm)
Idle Speed
(throttle lever at SLOW)
1,700 ± 150 rpm
Shop
manual
Valve Clearance (cold)
Intake:
0.15 ± 0.04 mm
Exhaust: 0.20 ± 0.04 mm
Shop
manual
Other Specifications
No other adjustments needed.