HONDA HRX217HXA - Manual (Page 61)

59
TRANSPORTING
BEFORE LOADING
Stop the engine (see page 26) and allow it to cool for at least 15
minutes before loading the mower on the transport vehicle. A hot
engine and exhaust system can burn you and can ignite some
materials.
1. Turn the fuel valve to the OFF position. This will prevent carburetor
flooding and reduce the possibility of fuel leakage.
2. If installed, remove the grass bag.
LOADING AND UNLOADING
If a suitable loading ramp is not available, two people should lift the
mower on and off the transport vehicle while holding the mower level.
Position the mower so all four wheels are on the bed of the transport
vehicle. Tie the mower down with rope or straps, and block the wheels.
Keep the tie-down rope or straps away from the controls, adjustment
levers, cables, and the carburetor.
The handlebar can be folded so the mower will take up less space
(page 57).
Remove the key from the switch to avoid damage (HRX217HMA
model only).
OFF
FUEL
VALVE