HP ep7100 Series - Manual (Page 51)

Installing permanently
User’s Guide 51
Video functions
Command Parameters Description
CSPC 0 to 2, ? Sets or queries the active color space:
0=RGB, 1=YPbPr, 2=YCbCr.
PMOD 0,1,3,4,5,? Sets or queries the picture mode:
0=computer, 1=movie, 3=sports, 4=TV,
5=custom.
VSHF value, +, -, ? Sets or queries the vertical shift of the
projected image: usable range is
determined by the active input source.
HSHF value, +, -, ? Sets or queries the horizontal shift of the
projected image: usable range is
determined by the active input source.
BRT 0 to 100, +, -, ? Sets or queries the brightness.
CON 0 to 100, +, -, ? Sets or queries the contrast.
SAT 0 to 100, +, -, ? Sets or queries the color saturation.
TNT -45 to 45, +, -, ? Sets or queries the tint.
CTMP 0 to 2, ? Sets or queries the color temperature:
0=warm, 1=neutral, 2=cool.
SHRP 0 to 12, +, -, ? Sets or queries the sharpness.
PENH 0 to 6, +, -, ? Sets or queries the picture
enhancement setting.
KEYV -50 to 50, +, -, ? Sets or queries the vertical keystone:
0=no keystone adjustment,
1 to 50=shrinks the top of the display,
-1 to -50=shrinks the bottom of the
display.
ASPT 0,1,4,? Sets or queries the aspect ratio:
0=1-to-1, 1=Best Fit, 4=Reduced.
SYNC None Automatically resynchronizes the
projector to the active computer input
source.
FREQ -50 to 50, +, -, ? Sets or queries the projector’s timing
relative to the active computer input
source.