HTC X+ - Manual (Page 159)

3. Tap Wi-Fi.
Detected Wi-Fi networks will be listed.
If the wireless network that you want is not listed, tap > Add network to manually
add it.
4. Tap the Wi-Fi network you want to connect to. If you selected a secured
network, you'll be asked to enter the network key or password.
5. Tap Connect. You'll see the Wi-Fi icon in the status bar when connected.
The next time HTC One X+ connects to a previously accessed secured wireless
network, you won’t be asked to enter the key or other security information again.
Connecting to a Wi-Fi network via WPS
If you're using a Wi-Fi router with Wi-Fi Protected Setup (WPS), you can connect
HTC One X+ easily.
1. Slide the Notifications panel open, and then tap .
2. Tap the Wi-Fi On/Off switch to turn Wi-Fi on.
3. Tap Wi-Fi.
4. Tap > WPS Push, and then press the WPS button on your Wi-Fi router.
To use the Wi-Fi Protected Setup (WPS) PIN method, tap > WPS Pin Entry.
Disconnecting from the current wireless network
1. Slide the Notifications panel open, and then tap .
2. Tap Wi-Fi.
3. You can:
§ Tap the wireless network that HTC One X+ is connected to, and then tap
Disconnect.
§ If you want to remove the settings for this network, press and hold the
network name, and then tap Forget network.
Connecting to a different Wi-Fi network
1. Slide the Notifications panel open, and then tap .
2. Tap Wi-Fi. Detected Wi-Fi networks are displayed.
To manually scan for available Wi-Fi networks, tap > Scan.
3. Tap a Wi-Fi network to connect to it.
159 Internet connections