HONDA EU 1000i - Manual (Page 26)

24
DC OPERATION
Connecting the battery charging cable (optional equipment):
The battery gives off explosive gases; keep sparks, flames and
cigarettes away. Provide adequate ventilation when charging or using
batteries.
WARNING:
Wash hands after handling.
PUSH OFF
ON
DC CIRCUIT PROTECTOR
DC RECEPTACLE
When using the DC output, turn the Eco-Throttle switch to the OFF
position.
Before connecting the battery charging cable to a battery that is
installed in a vehicle, disconnect the vehicle battery ground cable
from the negative (
) battery terminal.
The DC receptacle should ONLY be used for charging 12-volt
automotive type batteries. The DC charging output is not regulated.
Connect the red lead of the battery charging cable to the positive
(
) battery terminal and the black lead to the negative ( ) battery
terminal.
Plug the battery charging cable into the DC receptacle of the
generator.
Start the generator.
Battery posts, terminals and related accessories contain
lead and lead components.
1.
4.
2.
3.
06/12/21 11:17:17 31ZT3604_025