Hamilton Beach 840154800 - Manual (Page 5)

5
1. Follow Steps 1 through 3 in
“To Steam Iron.”
2. With iron in an upright position, turn
Temperature Control Dial to HIGH
and allow 2 minutes for iron to reach
desired temperature.
3. Hang garment in a location that is
not susceptible to damage from heat
or moisture. Do not hang in front of
wallpaper, window, or mirror.
4. Hold iron about 6 inches away from
garment and
press and
release the Blast
Button to steam
out wrinkles.
Wait at least 3
seconds before
pressing Blast
Button again.
5. To turn iron off, set Adjustable
Steam to (Dry Iron). Turn the
Temperature Control Dial to Off.
Unplug iron.
6. Empty water from the iron following
directions in “Caring for Your Iron.”
NOTE: Do not allow hot soleplate to
touch delicate garments.
To Vertical Steam
Fabric Setting Chart
Steam
Setting
Steam Range
Dry Iron
Off
Nylon,
Acrylic
Silk
Wool
Polyester
Rayon
Cotton,
Linen
Ironing Instructions
Dry iron using spray if necessary.
Dry iron on the inside of the garment.
Use a press cloth and steam iron on the
inside of garment.
Iron while fabric is still damp.
Iron using spray if necessary.
For cotton, iron while still damp or use
spray. For linen, iron fabric on the inside
of the garment. Use this setting for
vertical steaming.
Low •
Low •
Medium ••
Medium ••
High •••
High •••
Temperature Setting
840154800 Ev03.qxd 10/30/06 9:10 AM Page 5