HandHeld Entertainment 4600r - Manual (Page 112)

7 - 18
UPC-A
<Default All UPC-A Settings>
UPC-A
UPC-A Check Digit
This selection allows you to specify whether the check digit should be transmit-
ted at the end of the scanned data or not.
Default = On .
UPC-A Number System
The numeric system digit of a U.P.C. symbol is normally transmitted at the
beginning of the scanned data, but the unit can be programmed so it will not
transmit it.
Default = On.
* On
Off
* On
Off
Off
* On