Honeywell HZ-2016 - Manual (Page 4)

SAFETY FEATURES
This heater is equipped with several devices and features for added protection.
• A tip-over switch that disables the heater if it is accidentally tipped back
wards or forwards.
• A high temperature safety control prevents overheating (HI limit).
• A backup thermal circuit breaker.
• This heater is also equipped with motor thermal fuse that will shut down
the motor should it operate at a higher than normal temperature.
• This heater was created using a high quality safety plastic.
3
TROUBLESHOOTING
If your heater shuts off unexpectedly or fails to operate, one of your heater safety
features may have been activated to prevent overheating.
• Be sure it is plugged in and that the electrical outlet is working.
• Check your Thermostat setting. The unit may simply be off because you
have reached your desired heat setting.
• Check for any obstructions. If you find an obstruction, turn the heater
OFF and unplug it.
• Allow the heater to cool completely, then remove the obstruction. Wait at
least 10 minutes, then re-plug in the heater and follow the OPERATING
INSTRUCTIONS for your unit.
NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE RETURN THE
HEATER TO THE PLACE OF ORIGINAL PURCHASE OR SEE YOUR
WARRANTY. DO NOT ATTEMPT TO OPEN THE HEATER YOURSELF.
DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE
TO THE HEATER OR PERSONAL INJURY. IF YOU HAVE ANY
QUESTIONS REGARDING THIS HEATER, PLEASE CALL OR WRITE:
Honeywell Consumer Relations Dept.
Toll Free 1-800-332-1110
Email us at [email protected]
Mail questions and comments to:
Honeywell Consumer Products Business
Consumer Relations Department
250 Turnpike Road
Southborough, MA 01772
USA
Please be sure to specify model number.