Husqvarna 235FR EN - Manual (Page 34)

34 – English
TECHNICAL DATA
Technical data
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under
various working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved
cutting equipment fitted. The table indicates the highest and lowest values.
Technical data 232R 235R, 235FR
Engine
Cylinder displacement, cu.in/cm
3
1,88/30,8 2,45/40,2
Cylinder bore, inch/mm 1,38/35 1,57/40
Stroke, inch/mm 1,26/32 1,26/32
Idle speed, rpm 2700 2700
Recommended max. speed, rpm 11000-11700 11500-12500
Speed of output shaft, rpm 10000 10000
Max. engine output, acc. to ISO 8893, kW/ rpm 1,1/8400 1,3/9000
Catalytic converter muffler Yes Yes
Speed-regulated ignition system Yes Yes
Ignition system
Manufacturer/type of ignition system Walbro CD Walbro CD
Spark plug
NGK BPMR 7A/
Champion RCJ 7Y NGK BPMR 7A/
Champion RCJ 7Y
Electrode gap, inch/mm 0,02/0,5 0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburetor Walbro WT Walbro WT
Fuel tank capacity, US pint/litre 1,06/0,5 1,06/0,5
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 14,3/6,5 16,1/7,3
Sound levels
(see note 1)
Equivalent noise pressure level at the operator’s ear, measured
according to EN/ISO 11806 and ISO 7917, dB(A), min./max.:
90/100 98/100
Vibration levels
Vibration levels at handles, measured according to
ANSI B175.3-1997, m/s
2
At idle, left/right handles, min.: 2,5/2,5 2,6/2,8
At idle, left/right handles, max.: 3,0/3,5 3,2/4,0
At max. speed, left/right handles, min.: 2,0/2,0 4,6/3,0
At max. speed, left/right handles, max.: 5,1/4,9 9,3/6,4