Hughes DIRECWAY AN4-074-DF - Manual (Page 30)

Chapter 3 • Installing the radio and antenna assemblies
14
1035567-0001 Revision A
4. Place the Az/El mechanism over the revolving plate so the
bolt holes align.
5. Install a bolt from underneath the revolving plate. While
holding it with one hand, install the 7/16-in. flat washer and
nut. See Figure 10.
6. Repeat until all four bolts are installed.
Figure 10: Aligning the Az/el cap bolts
Align bolt from
underneath and
install washer
and nut.