Humax OC-2700 - Manual (Page 2)

www.humaxdigital.com
OC-2700
OpenCable Set-Top Box
Specification
Power Supply (internal)
Input Voltage AC 90 ~ 250V 60/50Hz
Tuner and Demodulator for NTSC and FAT
Cable Modem
Channel Standard NTSC signal
FAT ITU-TJ.83 Annex B
(OpenCable DVS 031 standard)
Input Frequency NTSC 54 ~ 552 MHz
FAT 54 ~ 864 MHz
Signal Level -15 ~ +15 dBmV @ 256 QAM
-15 ~ +15 dBmV @ 64 QAM
Demodulation 64/256 QAM
Input Symbol Rate 5.057/5.361 Msymbol/sec
Channel Standard DOCSIS 1.1 standard
OpenCable DOCSIS Set-top
Gateway Interface
(SP-DSG-101-020228)
Input Frequency Downstream 88 ~ 860 MHz
Upstream 5 ~ 42 MHz
Video Decoder
Transport Stream MPEG-2 ISO/IEC 13818
Profile Level MPEG-2 Main Profile @ Main Level
Input Rate Max. 15 Mbps
Video Formats 4:3, 16:9 (Letter Box)
Analog Copy Protection Macrovision
Audio Decoder
Channel Dolby AC3 and MPEG layer
I and II
/single/dual mono
/stereo/joint - stereo
Sampling Frequency 32/44.1/48K
Processor
CPU ARM920T processor, 250 MHz CPU
Memory
FLASH 16 Mbyte
SDRAM for System 64 Mbyte (128Mbyte)
SDRAM for MPEG & Graphic
EEPROM 128 kbit (256kbit)
RF-Loop through
RF/Loop through Output 75 ohm, F-connector
Connector (IEC 169-24), Female
Output Frequency 54 ~ 862 MHz
Front
Slot One slot for Cable Card
Buttons 10 buttons
Display 5 LED: Power, RCU, TV, Link,
On Line, 4 Digits (7 Segments)
Rear
Power Cable Fixed type
RCA 2 pairs of Video, Audio (Left/Right)
Component a pair of Y, Pb, Pr
S/PDIF 1 EA
S-Video 1 EA
10/100BaseT Ethernet port 1 EA
Input Cable F-connector (IEC 169-24), Female
Path Through Output F-connector (IEC 169-24), Female
Specifications and functions may be changed for improvement without notice in advance.