Heath Zenith 598-1143-01 User Manual

Page 3

Advertising
background image

-3-

598-1143-01

12345678

1234

5

6

7

Inside Push

Button

Strobe/Tune Settings

Your wireless chime has different selectable tunes:

Ding-Dong (two flashes/two

notes/two flashes) or

Westminster (eight flashes/eight notes/eight flashes). The

factory setting is for the Westminster tune. This tune can be changed by following
the instructions below.

Ding-Dong (Two note tune)

Strobe will flash two times, play the two note tune, then flash two more

times.

Push button: Add a jumper to location 8.

Westminster (Eight note tune)

Strobe will flash eight times, play the eight note tune, then flash eight more

times.

Push button: Remove jumper from location 8.

Push button Battery Replacement

Install an alkaline type A23 12 Volt battery.
See diagram inside push button for correct
battery orientation.

* Code Settings 1-7

Must Match Both

Push Button and

Chime

Remove screw to

open access door

Tune Setting

Back of

Chime

Note: Some models might require the use of

tweezers to remove and replace the jumpers.

Advertising