HONDA Backup Sensors 08V67-SHJ-1000-81 - Manual (Page 10)

10 © 2004 American Honda Motor Co., Inc. - All Rights Reserved.
3. Turn the backup sensor switch ON. The
switch is located on the left rear pillar next
to the tailgate. Before using the backup sensors, become familiar
with the types of sounds in relation to the distances
between the sensors and the obstacle by actually
backing your vehicle into a garage or parking space.
Also confirm the obstacle detecting range of each
backup sensor.
1. Apply the parking brake.
2. Turn the ignition switch to ON (II), but do
not start the engine yet.
ON
4. Move the shift lever to reverse.
Operation
4412010Y
ON
LEFT REAR
PILLAR TRIM