Programming the cooking mode, Automatic cleaning with the fast clean function – Hotpoint EG600P User Manual

Page 10

Advertising
background image

10

The cooking time and/or end cooking time can be pro-
grammed after the desired cooking mode has been se-
lected.

Programming the cooking time
Press button “4” and then adjust the cooking time by press-

ing keys

s

and

t

. Press the “4” button to store the

setting. The temperature selected (which can be adjusted
using knob “M” ) and the amount of time left until cooking
is complete will be displayed alternately
Once this time is up, the word «end» will be displayed and
a sequence of acoustic signals will be emitted to indicate
that cooking is complete.

Press any button to silence the acoustic signal.

Turn knob “L” back to position 0 to remove the word
«end» from the display.

For example
It is 9:00 a.m. and a cooking time of 1 hour and 15 minutes
is programmed. Cooking will stop automatically at 10:15
a.m..

Cooking time
= 1h15

Manual

start

Automatic stop

Time

Programming the end cooking time

Press button “3” and then adjust by pressing keys

s

and

t

. Press the “3” button to store the setting. The

display will remind you alternately of the temperature se-
lected and the amount of time left until cooking is com-
plete.
When the end cooking time selected previously is up, the
word «end» will be displayed and a sequence of acoustic
signals will be emitted to indicate that cooking is com-
plete..

Programming the cooking mode

Press any button to silence the acoustic signal.

Turn knob “L” back to position 0 to remove the word
«end» from the display.

For example
It is 9:00 a.m. and the end cooking time is set at 10:15
a.m.. Cooking will last 1 hour and 15 minutes.

Cooking time
= 1h15

Manual

start

Automatic stop

Time

Delayed cooking programming
Press button “4” and then adjust the cooking time by press-

ing keys

s

and

t

. Press the “4” to store the setting.

The temperature and the time set previously will be dis-
played alternately.
Press button “3” and then adjust end cooking time by press-

ing keys

s

and

t

. Press the”3" button to store the

setting and the display will remind you of the end cooking
time and of the temperature set alternately.
For example
It is 9:00 a.m. and a cooking time of 1 hour and 15 minutes
and 12:20 as the end cooking time are programmed. Cooking
will start automatically at 11:15 a.m..

12h30

Cooking time
= 1h15 and
end cooking
time set at
12.30 p.m.

9h00

10h00

11h00

12h00

11h15

Automatic

start

Programmed end

The icon A will remind you that you have programmed the
cooking time and/or the end cooking time.

To cancel a programmed time
To cancel any programming you have made, set knob “L
to position “0”.

When the fast clean function has been enabled, the
temperature inside the oven reaches 500°C, which is
necessary to burn all food residue that has built up inside it.
If you look through the oven glass, you may notice some
particles that light up as they are destroyed by pyrolysis
upon contact with the heating elements: this is simply
spontaneous combustion: it is perfectly normal and hazard-
free.

A few useful tips before automatic cleaning begins
1-
Try to remove large scraps of food and caked-on dirt with
a damp sponge. Avoid using detergents or any other special
products recommended for oven cleaning.
2- Remove all the accessories from the oven, as these are
not designed to withstand such high temperatures. In addition,
some accessories could affect the efficiency of the automatic
cleaning cycle by obstructing the circulation of heat along all
the interior walls of the oven. The accessories can easily be
washed like everyday crockery (even in your dishwasher).
3- Do not place tea towels over the oven handle.

Warning: during the automatic cleaning cycle, the surfaces

may become very hot. Keep children away from these.

How to enable the fast clean function
Shut the oven door.
Set the selector knob to

V

To programme the fast clean cycle time and/or cycle

end time, follow the instructions provided in the para-
graph entitled “Fast clean programming”. Please note
that you can choose a cycle time of between 60 and
120 minutes,

depending on the degree of soil in your

oven.

Safety devices
Given the high temperatures reached inside it, the oven is
fitted with several safety devices:

the door is locked automatically as soon as the tem-
perature exceeds a certain value, to avoid all risk of
burns;

the heating elements are no longer electrically pow-
ered
, as a precautionary measure, should a fault oc-
cur.

Automatic cleaning with the fast clean function

Advertising