Henny Penny DCW-2 User Manual
Page 16
SECTION 4. TROUBLESHOOTING
4-1. TROUBLESHOOTING GUIDE
PROBLEM
CAUSE CORRECTION
Product not holding
z
Doors are not kept closed
z
Product held too long
z
Temperature too low
z
Radiant heat too low
z
Light bulbs out
z
Keep doors closed when holding possible
z
Only hold product for recommended times
z
Turn to higher setting
z
Turn to higher setting
z
Replace as required, per light Bulbs and
Glass Panels section
Doors are fogging
z
Doors left open too much allowing
doors to cool and cause condensation
z
Radiant heat not high enough
z
Temperature too high
z
Keep doors closed when possible
z
Turn to higher setting
z
See recommended settings and temperature
Lights will not turn
on
z
Defective fuse
z
Replace 15 amp fuse
Not all lights on
z
Faulty light bulbs
z
Replace with recommended bulb, per Light
Bulbs and Glass Panels section
More detailed troubleshooting information is available in the Technical Manual, available at
www.hennypenny.com, or 800-417-8405 or 937-456-8405.
12